System Design

Expert heating system design kent for Homes and Businesses

Our heating system design service covers complete new central heating installations, upgrades to existing systems, and the low temperature designs required for air source heat pumps and underfloor heating, for homes and businesses across Kent. Every design is produced by the engineers who will install and commission it, which places responsibility for the system’s performance with one accountable team from the first calculation to the final handover.

What Our Heating Design Service Includes

Each commission produces a complete, documented design rather than an estimate. You receive:

  • A room-by-room heat loss calculation for the whole property, establishing the heat requirement of every room at design external temperature
  • A full radiator schedule, identifying which existing radiators are correctly sized, which require replacement, and the specification of each new emitter
  • Equipment specification: the boiler or heat pump model and output, hot water cylinder sizing, pump and pipework requirements
  • A zoning and controls plan, setting out heating zones, thermostat positions and the control strategy for the system
  • A fixed written quotation for the installation, itemised against the design
heating system design kent
heating system design kent

The Heat Loss Survey and Calculation Behind Every Design

The foundation of the service is a heat loss survey conducted at the property. Our engineers measure each room and record the construction of walls, floors, roofs, windows and doors, the insulation present, and the air change characteristics of the building. From these measurements we complete a room-by-room heat loss calculation in accordance with recognised industry methodology, consistent with the MCS standard for heat pump design and the principles of the CIBSE Domestic Heating Design Guide.

This is the calculation that determines everything downstream: the output of the appliance, the size of every radiator, the flow temperature the system will operate at, and the running costs you can expect. Where the survey identifies fabric issues that affect the design, such as absent loft insulation or significant air leakage, these are reported to you before the design is finalised, because addressing them is frequently less expensive than heating around them.

Smart Heating Controls Installed and Commissioned in Kent

Controls are specified as part of the design, not added afterwards. We select, install and commission smart heating controls for homes across Kent, matched to the appliance and the zoning plan, and configured before handover so the system operates efficiently from the first day. Each controls installation includes:

  • Zoned programmable thermostats, one per heating zone, positioned according to the design
  • Weather compensation, enabled wherever the boiler or heat pump supports it, so flow temperature adjusts automatically to outdoor conditions
  • Smartphone control as standard, with the app connected and demonstrated at commissioning
  • Configured schedules and flow temperatures, set against the design figures rather than factory defaults

On upgrade projects, replacing dated controls with a correctly configured smart system is frequently the most cost-effective single improvement available to an existing heating system

Zone valves and wiring centre for a zoned heating system in a Pembury home
Underfloor heating pipe layout and manifold design drawing for a Tonbridge property

How We Design Your heat pump systems ?

At Evo Flow Heating, we carefully manage the entire heating system design process, ensuring every home or business in Kent receives a highly efficient, reliable, and bespoke solution. From initial consultation to ongoing maintenance, our approach guarantees energy efficiency, comfort, and cost savings. We also integrate underfloor heating systems where suitable to maximise efficiency and comfort.

Our Step-by-Step Process:

  • Consultation – Assess your property, current system, and specific heating needs.

  • System Planning – Design a bespoke solution with heat pumps, boilers, underfloor heating, and smart controls.

  • Equipment Selection – Choose highly efficient and reliable technology for long-term performance.

  • Professional Installation – Install all components carefully for optimal efficiency and comfort.

  • Integration & Controls – Set up smart thermostats, underfloor heating controls, and renewable energy where applicable.

  • Testing & Commissioning – Ensure the system operates safely, efficiently, and provides constant temperatures.

  • Ongoing Maintenance – Provide servicing and support to maintain performance, reduce energy bills, and lower carbon emissions.

Why Choose Evo Flow for Your Heating System Design For energy efficiency ?

Expert System Design

At Evo Flow Heating, we specialise in heating system design Kent, creating tailored solutions for homes and businesses. Our fully qualified engineers have the expertise to design, install, and maintain heat pump systems, underfloor heating, gas and oil boilers, and integrated renewable energy solutions, ensuring your heating system is efficient, reliable, and cost-effective.

Proven Expertise

With years of experience across Kent, our team understands the local requirements and property layouts needed for highly efficient heating systems. We design systems to deliver constant temperatures, reduced energy bills, and lower carbon emissions, helping your property operate sustainably and efficiently.

Reputation

Evo Flow Heating has built a strong reputation for reliable service and professional workmanship. Our satisfied clients across Kent praise our transparent process, high-quality installations, and proactive maintenance, making us the go-to experts for bespoke heating system design.

Customer-Focused Service

We prioritise customer satisfaction at every step, providing clear advice, responsive communication, and ongoing support. Whether it’s a new system or upgrading an existing heating system, we ensure your project is seamless and stress-free.

Competitive Pricing

Our heating system design services are offered at competitive rates, delivering high-quality solutions without compromising on performance or efficiency.

Sustainability

As an environmentally conscious company, we focus on energy-efficient heating systems that integrate smart controls, renewable energy sources, and modern technology to reduce energy bills and carbon footprint, future-proofing your property for years to come.

Areas We Cover

If you’re looking for expert plumbers in Kent, Dartford, Maidstone, Tonbridge and all surrounding areas then contact Precise Plumbing and Heating Kent today.

We are a reliable, competent and well-established plumbing and heating business covering Dartford, Maidstone and Tonbridge. Established in 1980 we have a wealth of experience with residential customers
& long-standing investment land lords.

What Our Customers Say

Excellent service, boiler stopped working and Lucas came the next day, found the problem (pump) very quick and fitted a new pump. Brilliant will recommend to any one who needs a central heating engineer.
— Derek Balckwood
Lucas if friendly, reliable and answers any questions you have. Work is always carried out to a high standard.
— Old Wah
Lucas attended to my place of work for an emergency call-out. I was really appreciative for his assistance at such short notice. He attended on time and was quick to remedy the situation, as always Lucas kept me informed about what had needed to be replaced and worked in his usual tidy manner.
— Mrs R

Frequently Asked Questions – System Design Kent

What Is A Heat Loss Calculation?

A room-by-room calculation of how much heat a property loses through its walls, windows, floors, roof and ventilation at design external temperature. It determines the required output of the boiler or heat pump, the size of every radiator, and the flow temperature the system should run at.

Radiator size is determined by the room’s calculated heat loss and the system’s flow temperature, not by the size of the old radiator. Our design provides a full radiator schedule stating the required output for each room and the specification of any replacement.

A complete new central heating system for a typical Kent home generally costs between £4,000 and £8,000 installed, depending on the appliance, cylinder, number of radiators and pipework. The design stage produces a fixed written quotation, so the final figure is confirmed before work begins.

Do I Need A Heat Loss Survey For A Heat Pump Grant?

A compliant room-by-room heat loss calculation is required under MCS installation standards, which is a condition of the £7,500 Boiler Upgrade Scheme. Our designs meet this requirement as standard.

On most systems, yes. Correctly configured zoning, scheduling and weather compensation reduce running costs and improve comfort, and on older systems a controls upgrade is frequently the most cost-effective single improvement available.

Typically three to five days on site for a complete system in an occupied home, following the survey and design stage. The programme is confirmed with the quotation, and the system is commissioned and balanced before handover.

Service Areas Across Kent