Oil Boiler

Oil Boiler Service Kent by OFTEC Registered Engineers

Whatever brand of oil boiler you have, and however old it is, Evo Flow Heating can service it. We provide OFTEC registered oil boiler servicing, repairs, installations and tank work for homes and businesses across Kent: current boilers from Grant, Worcester Bosch, Firebird and Warmflow, and equally the older floor-standing and boiler-house models still heating many rural properties around Sevenoaks, Tonbridge, Maidstone and the Weald. If your boiler is from a brand that no longer exists or spares have grown scarce, tell us the model when you book and we will confirm parts availability before the visit rather than on your doorstep.

Call 01474 612061 to book, or use the contact form and we will come back to you the same working day.

Powerflushing Service Kent
oil boiler service kent

Our 7-Step Oil Boiler Servicing Checklist

Every oil boiler service we complete follows the same documented sequence, so you know exactly what has been done and why the visit takes between one and two hours:

  1. Replace the burner nozzle and inspect the flexible oil line. The nozzle is a wearing part; OFTEC guidance is annual renewal, and we include it as standard.
  2. Strip and clean the combustion chamber, baffles and heat exchanger. Soot deposits insulate the heat exchanger and push up fuel consumption; they are removed back to bare metal.
  3. Service the burner. Electrodes checked and gapped, photocell cleaned and tested, fan and air intake cleared.
  4. Clean or renew the oil filters at the tank and boiler, and check the fire valve.
  5. Inspect the flue for soundness, corrosion and safe termination.
  6. Test the mechanical and electrical components, including the pump, controls, motorised valves and expansion vessel, and clean any magnetic system filter.
  7. Recommission with a flue gas analysis. Air and pump pressure are set to the manufacturer’s published figures, and the combustion readings are recorded on your service certificate.

You receive a written service record with the readings, which manufacturers require to keep an oil boiler warranty in force.

How Much Does an Oil Boiler Service cost?

Our oil boiler service cost is £125 + VAT (£150), and the figure is complete. Some Kent providers advertise a lower headline price and then add the nozzle, filters or combustion test on the day; others note that “prices may vary” by boiler type. Ours does not. The replacement nozzle, the filter service, the tank condition check and the full combustion analysis are all inside the £125, for any domestic oil boiler, and the price is confirmed when you book. If you own or manage more than one oil-heated property, ask when booking and we will price the round of visits together.

Weighed against a mid-winter breakdown, with an emergency call-out, parts and days without heating in a home that has no other fuel, an annual service is the least expensive part of running an oil boiler. If the decision you are actually weighing is whether to keep servicing an older appliance at all, our guide to oil, combi and system boiler costs in Kent gives realistic installed prices for comparison.

Heating engineer commissioning an external oil boiler using a flue gas analyser
Heating engineer servicing an oil boiler with the casing removed

Oil Boiler Breakdowns and Emergency Repairs in Kent

When an oil boiler locks out or will not fire, we diagnose first and quote a fixed price before any repair begins. The recurring culprits are familiar: worn nozzles, fouled photocells, blocked filters, air or water in the fuel supply. Our vans carry these parts as standard stock, which is why the majority of oil boiler repairs we attend in Kent are completed on the first visit. Homes left without heating and hot water are prioritised, and where sludge in the system water is the underlying cause of poor heating rather than the boiler itself, a power flush of the central heating is often the repair that lasts.

Oil Tank Installation, Inspection and Replacement In Kent

The storage tank is part of every service we carry out, because tank failures are both the most preventable and the most expensive faults in oil heating. As the property owner you are legally responsible for the tank and for any pollution a leak causes, and building regulations set requirements for bases, separation distances and bunding. During the annual visit we assess the tank’s condition, check for water contamination in the fuel, and inspect the gauge, vent and base.

Where a tank is reaching the end of its life, we supply and install replacements, including bunded models, to current OFTEC standards, and we can sequence a tank replacement alongside a boiler installation so the disruption happens once. Small findings are fixed small: a seal, a gauge, a filter relocation, caught a season before they become an environmental clean-up.

Oil boiler with the front casing removed, showing the burner and flue
Internal oil boiler opened for servicing, showing the burner and expansion vessel

New Oil Boiler Installation and Replacement Kent

Oil boilers are long-lived, but when the heat exchanger is pitted beyond cleaning or spares have become unobtainable, replacement beats another repair. Evo Flow installs internal, external and boiler-house oil boilers across Kent from the leading manufacturers, each project starting with a room-by-room heat loss calculation so the new appliance is sized to your property, not estimated. Modern condensing oil boilers exceed 90 per cent efficiency, and manufacturer warranties remain in force through the annual servicing we provide afterwards.

Every installation begins with a free survey and a fixed written quotation. Where the heating system is being reconsidered as a whole, our heating system design service covers radiators, cylinders, controls and zoning together. Homeowners thinking beyond oil can also ask us about air source heat pumps, supported by the £7,500 Boiler Upgrade Scheme grant for off-gas properties, and our comparison of gas and oil heating for Kent homes sets out the trade-offs. Properties on mains gas are served by our separate gas boiler service in Kent.

Why Choose EvoFLow for your

Oil Boiler Installation In Kent?

OFTEC Approved Installation

At Evo Flow Heating, all oil boiler installations and oil-fired systems are carried out by fully qualified OFTEC registered engineers. Whether it’s a new boiler, tank installation, or system upgrades, our team ensures your heating system is installed safely, efficiently, and reliably for residential and commercial properties across Kent and the South East.

Professional Oil Boiler Servicing

Our oil boiler service Kent includes cleaning, maintenance, and replacement of key components to keep your oil-fired boiler running efficiently. We provide annual boiler servicing, emergency repairs, and system running checks for domestic and commercial customers, giving peace of mind and prolonging boiler life

Reliable Heating Solutions

From plumbing emergencies to boiler breakdowns, our friendly team delivers prompt and courteous service, ensuring minimal disruption. We specialise in oil-fired heating systems, hot water cylinders, underfloor heating, and central heating installations to keep homes and businesses warm, safe, and comfortable.

Expert Maintenance & Repairs

Our engineers undertake oil boiler repairs, emergency services, and tank servicing with professional expertise. Using fully stocked vans and reliable tools, we handle everything from leaking boilers to burst pipes, ensuring your heating system is restored quickly and efficiently.

Customer-Focused Service

We prioritise customer satisfaction with a personal service approach. Whether providing landlord certificates, advice on system upgrades, or handling commercial plumbing and heating emergencies, our team ensures every job is completed professionally, safely, and with minimal disruption.

Competitive & Transparent Pricing

As an established heating company in Kent, we offer honest, competitive pricing for oil boiler installations, servicing, and system upgrades. From routine maintenance to same-day emergency repairs, our aim is to provide reliable solutions that fit your budget and keep your heating system operating at peak efficiency.

Areas We Cover

If you’re looking for expert plumbers in Kent, Dartford, Maidstone, Tonbridge and all surrounding areas then contact Precise Plumbing and Heating Kent today.

We are a reliable, competent and well-established plumbing and heating business covering Dartford, Maidstone and Tonbridge. Established in 1980 we have a wealth of experience with residential customers
& long-standing investment land lords.

What Our Customers Say

Excellent service, boiler stopped working and Lucas came the next day, found the problem (pump) very quick and fitted a new pump. Brilliant will recommend to any one who needs a central heating engineer.
— Derek Balckwood
Lucas if friendly, reliable and answers any questions you have. Work is always carried out to a high standard.
— Old Wah
Lucas attended to my place of work for an emergency call-out. I was really appreciative for his assistance at such short notice. He attended on time and was quick to remedy the situation, as always Lucas kept me informed about what had needed to be replaced and worked in his usual tidy manner.
— Mrs R

Frequently Asked Questions – Oil Boiler Servicing Kent

When Is The Best Time To Book An Oil Boiler Service?

Late summer or early autumn, before the heating season begins. Faults often surface after the summer shutdown, engineer diaries are open, and any worn parts can be replaced without urgency. We run a reminder service so the date is not missed.

We service current boilers from Grant, Worcester Bosch, Firebird and Warmflow, and the older or discontinued brands still found in rural Kent. Give us the make and model when booking and we confirm parts availability in advance.

Usually a worn nozzle, a dirty photocell, a blocked filter, or air or water in the fuel supply. Each is inexpensive once diagnosed; repeatedly pressing reset without diagnosis risks a more damaging failure.

Do You Look After Oil Tanks As Well?

Yes. Every service includes a tank condition check, and we install replacement and bunded tanks to current OFTEC standards. Tank condition matters legally as well as practically: the owner is responsible for any pollution from a leak.

Installed costs for a new oil boiler in Kent typically range from around £3,000 to £6,000 depending on the model, its location, the condition of the flue and fuel supply, and whether the tank is replaced at the same time. We confirm a fixed written price after a free survey.

The correct size is calculated, not guessed. We complete a room-by-room heat loss calculation covering your property’s insulation, glazing and radiators, then match the boiler output to the result. An oversized boiler cycles inefficiently; an undersized one never quite heats the home.

Service Areas Across Kent