At Evo Flow Heating, We designs, installs, repairs and services underfloor heating for homes and businesses across Kent, covering wet underfloor heating systems, electric underfloor heating and bathroom installations as one complete, all-in-one service from a single accountable team. Underfloor heating warms each room evenly from the floor up at low water temperatures, frees every wall of radiators, and reduces running costs when the system behind it is correctly engineered.
Engineering is therefore the foundation of every project we undertake. Each installation begins with a room-by-room heat loss calculation as part of our heating system design approach, so that pipe spacing, zones and controls are specified for your property rather than taken from a catalogue, and the same team manages the project from first survey through to commissioning and aftercare.
Bathrooms are the most frequently requested single-room application for underfloor heating, and for practical reasons: tiled floors are kept warm underfoot, wall space is released for the towel rail and sanitaryware, and the even floor temperature helps the room dry after use. We install bathroom underfloor heating across Kent in both system types, specified according to the scope of the project. Each bathroom installation includes:
The complete installation is delivered and signed off by one team, from first measurement to the final commissioning of the thermostat, with recent projects including underfloor heating in Gravesend and bathrooms throughout the county.
Electric underfloor heating typically costs £50 to £75 per square metre installed, and wet underfloor heating £85 to £100 per square metre, with the final figure depending on floor construction, insulation requirements, zoning and the state of the subfloor. A single bathroom sits at one end of that scale; a full ground floor with multiple zones sits at the other. Every project is priced after a survey as a fixed written quotation covering:
Underfloor heating rarely fails at the pipe; it fails at the manifold, the controls or the water quality, and all three are repairable without lifting a floor. We diagnose and repair underfloor heating across Kent: cold zones traced to stuck actuators or airlocked loops, failed circulation pumps and thermostats, unbalanced manifolds leaving one room cold while another overheats, and sludged circuits starving the floor of flow, for which a power flush of the heating system restores circulation through the loops and manifold together.
We repair heating under tile, under wood flooring and under carpet alike, in both wet and electric systems, and where a genuine underfloor heating leak is suspected we confirm it with pressure testing before anything is disturbed, tracing the fault to its loop so that any access needed is measured in centimetres rather than rooms. An annual check of the manifold, actuators, pressures and inhibitor levels keeps the system reliable, and we service underfloor heating installed by others as readily as our own.
The subfloor and screed determine how efficiently an underfloor heating system performs throughout its service life, so we carry out this stage ourselves as an integral part of the installation. The process begins with an assessment of the existing subfloor, followed by the installation of insulation to the required specification and a damp proof membrane. The pipe loops are then fixed at the spacing set out in the system design, pressure tested, and inspected before any screed is applied. For overlay installations, the existing floor is levelled with a smoothing compound where required, providing the flat, stable base that low-profile panels depend on.
For the screed itself, we install either traditional sand and cement screed or liquid flowing screed, selected according to the floor construction and the project timescale. Liquid screed is pumped and self-levelling, accepts light foot traffic within 24 hours, and reduces the overall installation programme significantly compared with a traditional screed. Once the screed has cured, we specify the drying period and carry out the commissioning heat-up in controlled temperature increments, in accordance with the screed manufacturer’s specification, before the final floor covering is laid. This staged procedure protects the screed from thermal shock and ensures the system is handed over in the correct condition.
All our underfloor heating systems are installed by fully qualified Gas Safe registered engineers across Kent, including Tunbridge Wells. From new systems to gas boiler replacements, we manage the entire process, ensuring low flow temperatures, constant domestic hot water, and energy-efficient performance for homes and businesses.
Our team specialises in heating system design in Kent, combining advanced controls, smart controls, and underfloor heating operates efficiently to deliver peak performance and reduced running costs. Every system is tailored to your specific requirements, whether residential or commercial.
Evo Flow Heating is known for reliable service, quality workmanship, and modern heating solutions. Our satisfied clients praise our professional installation, proactive maintenance, and energy-efficient systems that help reduce carbon emissions and energy bills.
We provide responsive support and annual servicing to keep your underfloor heating at peak performance. Our team ensures your heating system operates efficiently, delivering constant temperatures, low energy costs, and reliable hot water for every property.
We offer cost-effective underfloor heating systems without compromising on quality. With competitive pricing, energy efficiency, and future-proof design, we help clients reduce running costs, energy bills, and their carbon footprint.
Our systems are an eco-friendly alternative to fossil fuels, integrating battery storage, smart controls, and efficient equipment to minimise carbon emissions. Evo Flow Heating delivers modern, reliable, and energy-efficient underfloor heating for homes and businesses across Kent.
If you’re looking for expert plumbers in Kent, Dartford, Maidstone, Tonbridge and all surrounding areas then contact Precise Plumbing and Heating Kent today.
We are a reliable, competent and well-established plumbing and heating business covering Dartford, Maidstone and Tonbridge. Established in 1980 we have a wealth of experience with residential customers & long-standing investment land lords.
An in-screed wet system typically takes two to four hours to bring a cold floor to temperature, which is why it runs best on a schedule rather than on demand. Low-profile overlay and electric systems respond in well under an hour.
Typically £50 to £75 per square metre installed for electric systems and £85 to £100 per square metre for wet systems in Kent, depending on floor construction, insulation and zoning. Evo Flow Heating confirms a fixed written price after a survey.
Wet underfloor heating is generally cheaper to run than radiators because it heats rooms evenly at low water temperatures, and it is at its most economical paired with a heat pump. Electric underfloor heating costs more per unit of heat and is best reserved for single rooms.
Yes, provided the combined thermal resistance of the carpet and underlay is 1.5 tog or less. Tile, stone, engineered wood, laminate and vinyl all perform well; we confirm compatibility of your chosen floor finish at the design stage.
For comfort and running costs at low flow temperatures, yes: heat is delivered evenly across the whole room with no cold corners and no wall space lost. Radiators retain the advantage of faster response in rooms used only occasionally.
Room thermostats are usually set between 19°C and 21°C, with the water flow temperature typically 35°C to 45°C for wet systems. We set zone schedules and flow temperatures at commissioning so the system runs efficiently from day one.